TCryptLib 找速达财务软件官网
2楼: marcusyin@163.com
有没有用过的阿？？ 如速达财务软件官网
3楼: 大家给点思路撒！！
4楼: function GetIdeDiskSerialNumber : String;
type
TSrbIoControl = packed record
HeaderLength : ULONG;
Signature : Array[0..7] of Char;
Timeout : ULONG;
ControlCode : ULONG;
ReturnCode : ULONG;
Length : ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl;
TIDERegs = packed record
bFeaturesReg : Byte; // Used for specifying SMART ＂commands＂.
bSectorCountReg : Byte; // IDE sector count register
bSectorNumberReg : Byte; // IDE sector number register
bCylLowReg : Byte; // IDE low order cylinder value
bCylHighReg : Byte; // IDE high order cylinder value
bDriveHeadReg : Byte; // IDE drive/head register
bCommandReg : Byte; // Actual IDE command.
bReserved : Byte; // reserved. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs;
TSendCmdInParams = packed record
cBufferSize : DWORD;
irDriveRegs : TIDERegs;
bDriveNumber : Byte;
bReserved : Array[0..2] of Byte;
dwReserved : Array[0..3] of DWORD;
bBuffer : Array[0..0] of Byte;
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams;
TIdSector = packed record
wGenConfig : Word;
wNumCyls : Word;
wReserved : Word;
wNumHeads : Word;
wBytesPerTrack : Word;
wBytesPerSector : Word;
wSectorsPerTrack : Word;
wVendorUnique : Array[0..2] of Word;
sSerialNumber : Array[0..19] of Char;
wBufferType : Word;
wBufferSize : Word;
wECCSize : Word;
sFirmwareRev : Array[0..7] of Char;
sModelNumber : Array[0..39] of Char;
wMoreVendorUnique : Word;
wDoubleWordIO : Word;
wCapabilities : Word;
wReserved1 : Word;
wPIOTiming : Word;
wDMATiming : Word;
wBS : Word;
wNumCurrentCyls : Word;
wNumCurrentHeads : Word;
wNumCurrentSectorsPerTrack : Word;
ulCurrentSectorCapacity : ULONG;
wMultSectorStuff : Word;
ulTotalAddressableSectors : ULONG;
wSingleWordDMA : Word;
wMultiWordDMA : Word;
bReserved : Array[0..127] of Byte;
end;
PIdSector = ^TIdSector;
const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007c088;
IOCTL_SCSI_MINIPORT = $0004d008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001b0501;
DataSize = sizeof(TSendCmdInParams)-1+IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL)+DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE+16;
var
hDevice : THandle;
cbBytesReturned : DWORD;
pInData : PSendCmdInParams;
pOutData : Pointer; // PSendCmdOutParams
Buffer : Array[0..BufferSize-1] of Byte;
srbControl : TSrbIoControl absolute Buffer;
procedure ChangeByteOrder( var Data; Size : Integer );
var
ptr : PChar;
i : Integer;
c : Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1)-1 do
begin
c := ptr^;
ptr^ := (ptr+1)^;
(ptr+1)^ := c;
Inc(ptr,2);
end;
end;
begin
Result := ＇＇＇＇;
FillChar(Buffer,BufferSize,#0);
if Win32Platform=VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// Get SCSI port handle
hDevice := CreateFile( ＇＇＼＼.＼Scsi0:＇＇,
GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE,nil, OPEN_EXISTING, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then
Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move(＇＇SCSIDISK＇＇,srbControl.Signature,8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer)+SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, IOCTL_SCSI_MINIPORT,@Buffer, BufferSize, @Buffer, BufferSize,cbBytesReturned, nil ) then
Exit;
finally
CloseHandle(hDevice);
end;
end
else
begin // Windows 95 OSR2, Windows 98
hDevice := CreateFile( ＇＇＼＼.＼SMARTVSD＇＇, 0, 0, nil,
CREATE_NEW, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then
Exit;
try
pInData := PSendCmdInParams(@Buffer);
pOutData := @pInData^.bBuffer;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, DFP_RECEIVE_DRIVE_DATA,pInData, SizeOf(TSendCmdInParams)-1, pOutData,W9xBufferSize, cbBytesReturned, nil ) then
Exit;
finally
CloseHandle(hDevice);
end;
end;
with PIdSector(PChar(pOutData)+16)^ do
begin
ChangeByteOrder(sSerialNumber,SizeOf(sSerialNumber));
SetString(Result,sSerialNumber,SizeOf(sSerialNumber));
end;
end;
5楼: 通常情况下,我们通过0XEC命令对IDE端口进行监测.获取硬盘信息.
一般情况下,我们就写个VXD或者DRIVER来完成.但是现在,通过MS的S.M.A.R.T.接口,我们可以直接从RING3调用API DeviceIoControl()来获取硬盘信息.
下面乃是我的例程:
另外,也有编译好的版本供大家平时使用.欢迎下载.
*注:在WIN98SE,WINDOWS ME中,S.M.A.R.T并不缺省安装.请将SMARTVSD.VXD拷贝到%SYSTEM%＼IOSUBSYS目录下.
在WINDOWS2000下,由于非ADMINISTRATORS组的用户对硬盘连GENERIC_READ的权限也没有,所以请以ADMINISTRATOR登录后使用.
/*+++
HDID.CPP
Written by Lu Lin
http://lu0.126.com
2000.11.3
---*/
#include <windows.h>
#include <iostream.h>
#include <stdio.h>
#define DFP_GET_VERSION 0x00074080
#define DFP_SEND_DRIVE_COMMAND 0x0007c084
#define DFP_RECEIVE_DRIVE_DATA 0x0007c088
#pragma pack(1)
typedef struct _GETVERSIONOUTPARAMS {
BYTE bVersion; // Binary driver version.
BYTE bRevision; // Binary driver revision.
BYTE bReserved; // Not used.
BYTE bIDEDeviceMap; // Bit map of IDE devices.
DWORD fCapabilities; // Bit mask of driver capabilities.
DWORD dwReserved[4]; // For future use.
} GETVERSIONOUTPARAMS, *PGETVERSIONOUTPARAMS, *LPGETVERSIONOUTPARAMS;
typedef struct _IDEREGS {
BYTE bFeaturesReg; // Used for specifying SMART ＂commands＂.
BYTE bSectorCountReg; // IDE sector count register
BYTE bSectorNumberReg; // IDE sector number register
BYTE bCylLowReg; // IDE low order cylinder value
BYTE bCylHighReg; // IDE high order cylinder value
BYTE bDriveHeadReg; // IDE drive/head register
BYTE bCommandReg; // Actual IDE command.
BYTE bReserved; // reserved for future use. Must be zero.
} IDEREGS, *PIDEREGS, *LPIDEREGS;
typedef struct _SENDCMDINPARAMS {
DWORD cBufferSize; // Buffer size in bytes
IDEREGS irDriveRegs; // Structure with drive register values.
BYTE bDriveNumber; // Physical drive number to send
// command to (0,1,2,3).
BYTE bReserved[3]; // Reserved for future expansion.
DWORD dwReserved[4]; // For future use.
//BYTE bBuffer[1]; // Input buffer.
} SENDCMDINPARAMS, *PSENDCMDINPARAMS, *LPSENDCMDINPARAMS;
typedef struct _DRIVERSTATUS {
BYTE bDriverError; // Error code from driver,
// or 0 if no error.
BYTE bIDEStatus; // Contents of IDE Error register.
// Only valid when bDriverError
// is SMART_IDE_ERROR.
BYTE bReserved[2]; // Reserved for future expansion.
DWORD dwReserved[2]; // Reserved for future expansion.
} DRIVERSTATUS, *PDRIVERSTATUS, *LPDRIVERSTATUS;
typedef struct _SENDCMDOUTPARAMS {
DWORD cBufferSize; // Size of bBuffer in bytes
DRIVERSTATUS DriverStatus; // Driver status structure.
BYTE bBuffer[512]; // Buffer of arbitrary length
// in which to store the data read from the drive.
} SENDCMDOUTPARAMS, *PSENDCMDOUTPARAMS, *LPSENDCMDOUTPARAMS;
typedef struct _IDSECTOR {
USHORT wGenConfig;
USHORT wNumCyls;
USHORT wReserved;
USHORT wNumHeads;
USHORT wBytesPerTrack;
USHORT wBytesPerSector;
USHORT wSectorsPerTrack;
USHORT wVendorUnique[3];
CHAR sSerialNumber[20];
USHORT wBufferType;
USHORT wBufferSize;
USHORT wECCSize;
CHAR sFirmwareRev[8];
CHAR sModelNumber[40];
USHORT wMoreVendorUnique;
USHORT wDoubleWordIO;
USHORT wCapabilities;
USHORT wReserved1;
USHORT wPIOTiming;
USHORT wDMATiming;
USHORT wBS;
USHORT wNumCurrentCyls;
USHORT wNumCurrentHeads;
USHORT wNumCurrentSectorsPerTrack;
ULONG ulCurrentSectorCapacity;
USHORT wMultSectorStuff;
ULONG ulTotalAddressableSectors;
USHORT wSingleWordDMA;
USHORT wMultiWordDMA;
BYTE bReserved[128];
} IDSECTOR, *PIDSECTOR;
/*+++
Global vars
---*/
GETVERSIONOUTPARAMS vers;
SENDCMDINPARAMS in;
SENDCMDOUTPARAMS out;
HANDLE h;
DWORD i;
BYTE j;
void CopyRight(){
cerr<<endl<<＂HDD identifier v1.0 for WIN95/98/Me/NT/2000. written by Lu Lin＂<<endl;
cerr<<＂For more information, please visit Inside Programming: http://lu0.126.com＂<<endl;
cerr<<＂2000.11.3＂<<endl<<endl;
}
VOID ChangeByteOrder(PCHAR szString, USHORT uscStrSize)
{
USHORT i;
CHAR temp;
for (i = 0; i < uscStrSize; i
来自: 影 子, 时间: 2002-11-29 18:38:00, ID: 1472187
//看看能不能用
function GetIdeDiskSerialNumber : String;
type
TSrbIoControl = packed record
HeaderLength : ULONG;
Signature : Array[0..7] of Char;
Timeout : ULONG;
ControlCode : ULONG;
ReturnCode : ULONG;
Length : ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl;
TIDERegs = packed record
bFeaturesReg : Byte; // Used for specifying SMART ＂commands＂.
bSectorCountReg : Byte; // IDE sector count register
bSectorNumberReg : Byte; // IDE sector number register
bCylLowReg : Byte; // IDE low order cylinder value
bCylHighReg : Byte; // IDE high order cylinder value
bDriveHeadReg : Byte; // IDE drive/head register
bCommandReg : Byte; // Actual IDE command.
bReserved : Byte; // reserved. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs;
TSendCmdInParams = packed record
cBufferSize : DWORD;
irDriveRegs : TIDERegs;
bDriveNumber : Byte;
bReserved : Array[0..2] of Byte;
dwReserved : Array[0..3] of DWORD;
bBuffer : Array[0..0] of Byte;
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams;
TIdSector = packed record
wGenConfig : Word;
wNumCyls : Word;
wReserved : Word;
wNumHeads : Word;
wBytesPerTrack : Word;
wBytesPerSector : Word;
wSectorsPerTrack : Word;
wVendorUnique : Array[0..2] of Word;
sSerialNumber : Array[0..19] of Char;
wBufferType : Word;
wBufferSize : Word;
wECCSize : Word;
sFirmwareRev : Array[0..7] of Char;
sModelNumber : Array[0..39] of Char;
wMoreVendorUnique : Word;
wDoubleWordIO : Word;
wCapabilities : Word;
wReserved1 : Word;
wPIOTiming : Word;
wDMATiming : Word;
wBS : Word;
wNumCurrentCyls : Word;
wNumCurrentHeads : Word;
wNumCurrentSectorsPerTrack : Word;
ulCurrentSectorCapacity : ULONG;
wMultSectorStuff : Word;
ulTotalAddressableSectors : ULONG;
wSingleWordDMA : Word;
wMultiWordDMA : Word;
bReserved : Array[0..127] of Byte;
end;
PIdSector = ^TIdSector;
const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007c088;
IOCTL_SCSI_MINIPORT = $0004d008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001b0501;
DataSize = sizeof(TSendCmdInParams)-1+IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL)+DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE+16;
var
hDevice : THandle;
cbBytesReturned : DWORD;
pInData : PSendCmdInParams;
pOutData : Pointer; // PSendCmdOutParams
Buffer : Array[0..BufferSize-1] of Byte;
srbControl : TSrbIoControl absolute Buffer;
procedure ChangeByteOrder( var Data; Size : Integer );
var ptr : PChar;
i : Integer;
c : Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1)-1 do
begin
c := ptr^;
ptr^ := (ptr+1)^;
(ptr+1)^ := c;
Inc(ptr,2);
end;
end;
begin
Result := ＇＇＇＇;
FillChar(Buffer,BufferSize,#0);
if Win32Platform=VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// Get SCSI port handle
hDevice := CreateFile( ＇＇＼＼.＼Scsi0:＇＇,
GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE,
nil, OPEN_EXISTING, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move(＇＇SCSIDISK＇＇,srbControl.Signature,8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer)
+SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, IOCTL_SCSI_MINIPORT,
@Buffer, BufferSize, @Buffer, BufferSize,
cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end
else
begin // Windows 95 OSR2, Windows 98
hDevice := CreateFile( ＇＇＼＼.＼SMARTVSD＇＇, 0, 0, nil,
CREATE_NEW, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
pInData := PSendCmdInParams(@Buff
来自: dhycq, 时间: 2002-11-29 18:49:00, ID: 1472217
function GetIdeSerialNumber: pchar;
const IDENTIFY_BUFFER_SIZE = 512;
type
TIDERegs = packed record
bFeaturesReg: BYTE; // Used for specifying SMART ＂commands＂.
bSectorCountReg: BYTE; // IDE sector count register
bSectorNumberReg: BYTE; // IDE sector number register
bCylLowReg: BYTE; // IDE low order cylinder value
bCylHighReg: BYTE; // IDE high order cylinder value
bDriveHeadReg: BYTE; // IDE drive/head register
bCommandReg: BYTE; // Actual IDE command.
bReserved: BYTE; // reserved for future use. Must be zero.
end;
TSendCmdInParams = packed record
// Buffer size in bytes
cBufferSize: DWORD;
// Structure with drive register values.
irDriveRegs: TIDERegs;
// Physical drive number to send command to (0,1,2,3).
bDriveNumber: BYTE;
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte; // Input buffer.
end;
TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of CHAR;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: DWORD;
wMultSectorStuff: Word;
ulTotalAddressableSectors: DWORD;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of BYTE;
end;
PIdSector = ^TIdSector;
TDriverStatus = packed record
// 驱动器返回的错误代码，无错则返回0
bDriverError: Byte;
// IDE出错寄存器的内容，只有当bDriverError 为 SMART_IDE_ERROR 时有效
bIDEStatus: Byte;
bReserved: array[0..1] of Byte;
dwReserved: array[0..1] of DWORD;
end;
TSendCmdOutParams = packed record
// bBuffer的大小
cBufferSize: DWORD;
// 驱动器状态
DriverStatus: TDriverStatus;
// 用于保存从驱动器读出的数据的缓冲区，实际长度由cBufferSize决定
bBuffer: array[0..0] of BYTE;
end;
var
hDevice: Thandle;
cbBytesReturned: DWORD;
SCIP: TSendCmdInParams;
aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE - 1) - 1] of Byte;
IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
procedure ChangeByteOrder(var Data; Size: Integer);
var
ptr: Pchar;
i: Integer;
c: Char;
begin
ptr := @Data;
for I := 0 to (Size shr 1) - 1 do begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := ＇＇＇＇; // 如果出错则返回空串
if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then begin // Windows NT, Windows 2000
// 提示! 改变名称可适用于其它驱动器，如第二个驱动器： ＇＇＼＼.＼PhysicalDrive1＼＇＇
hDevice := CreateFile(＇＇＼＼.＼PhysicalDrive0＇＇, GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
end else // Version Windows 95 OSR2, Windows 98
hDevice := CreateFile(＇＇＼＼.＼SMARTVSD＇＇, 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
cbBytesReturned := 0;
// Set up data structures for IDENTIFY command.
with SCIP do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
// bDriveNumber := 0;
with irDriveRegs do begin
bSectorCountReg := 1;
bSectorNumberReg := 1;
// if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
// else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
bDriveHeadReg := $A0;
bCommandReg := $EC;
end;
end;
if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1,
@aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
with PIdSector(@IdOutCmd.bBuffer)^ do begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
(Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^ := #0;
Result := Pchar(@sSerialNumber);
end;
end;
6楼: SmallGhost ，你的方法似乎不能很确定的检测出硬盘的类型啊？？能不能在仔细说明一下啊？？
联系我们
